Eminence - KAPPA 15 LFA

Eminence Kappa - Haut-parleur 15" 600 W 8 Ohms. La série KAPPA propose une gamme de HP avec châssis en acier, bobine en cuivre et cône en papier.

La série KAPPA propose une gamme de HP avec châssis en acier, bobine en cuivre et cône en papier.
On trouve un support de bobine en KAPTON et un aimant ferrite. La suspension de membrane est en lin plastifié avec un bouchon anti-poussière en papier.

Série KAPPA-15LFA American Standard
Recommandé pour applications audio professionnelles, enceinte graves/médium ou graves bass reflex. Convient aussi pour ampli basse.


SPECIFICATION
Nominal Basket Diameter 15", 381 mm
Nominal Impedance 8 ohms
Power Rating Watts 600 W / Music Program 1200 W
Resonance 39 Hz
Usable Frequency Range 38 Hz - 2.7 kHz
Sensitivity 99
Magnet Weight 95 oz.
Gap Height 0.375", 9.53 mm
Voice Coil Diameter 3", 76.2 mm

THIELE & Small Parameters
Resonant Frequency (fs) 39 Hz
DC Resistance (Re) 5.4
Coil Inductance (Le) 1.27 mH
Mechanical Q (Qms) 6.08
Electromagnetic Q (Qes) 0.41
Total Q (Qts) 0.38
Compliance Equivalent Volume (Vas) 159.0 liters / 5.6 cu. ft.
Peak Diaphragm Displacement Volume (Vd) 471 cc
Mechanical Compliance of Suspension (Cms) 0.15 mm/N
BL Product (BL) 18.6 T-M
Diaphragm Mass inc. Airload (Mms) 105 grams
Efficiency Bandwidth Product (EBP) 95
Maximum Linear Excursion (Xmax) 5.5 mm
Surface Area of Cone (Sd) 856.3 cm²
Maximum Mechanical Limit (Xlim) 10.4 mm

MOUNTING Information
Recommended Enclosure Volume
Sealed N/A
Vented 62-193 liters/2.2-6.8 cu.ft.
Overall Diameter 15.16", 384.9 mm
Baffle Hole Diameter 13.77", 349.6 mm
Front Sealing Gasket fitted as standard
Rear Sealing Gasket fitted as standard
Mounting Holes Diameter 0.25", 6.4 mm
Mounting Holes B.C.D. 14.56", 369.9 mm
Depth 6.38", 162 mm

MATERIALS of Construction
Copper voice coil
Polyimide former
Ferrite magnet
Vented core
Pressed steel basket
Paper Cone
Cloth cone edge
Solid composition paper dust cap